|
SPV-1 VIDEO SWITCHER
The Bryston SPV-1 is a high quality, multi-path,
video switcher intended to be used in combination with the Bryston
SP2 surround processor or as a stand alone video switcher.
INPUTS
The Bryston SPV-1 Video Switcher offers six
Composite inputs, six S-Video inputs and two Component inputs.
Each set constitutes an isolated switching path.
OUTPUTS
Outputs include main (monitor) for Composite,
S-Video, and Component as well as record outputs for Composite
and S-Video. The main outputs have On-Screen Display (OSD) capability
when used in combination with the Bryston SP2 surround processor
or any other RS-232 control system.
On-Screen Display
On-Screen Display (OSD) allows set-up and status
information from the SP2 to be displayed on your video monitor.
If OnScreen Display (OSD) is desired, this can be toggled on or
off by pressing the OSD button on the SP2 remote control or
on the SPV-1 front panel. The OSD messages will be sent from the
SP2 to the SPV-1 and displayed on the video monitor. OSD messages
are displayed when changing inputs, changing mode, changing volume,
or while using the setup menus.
INFRA-RED
Infra-Red (IR) control is also offered. The
functions are accessed by the SP2 remote control, or by Pronto
codes available from Bryston.
ONE TWO PUNCH
The combination of the Bryston SP2 Surround
Processor and SVP-1 Video Switcher provides for totally seamless
integration of all audio and video functions.
POWER UP
The Bryston SP2 contains
all the RS-232 codes needed to simultaneously control the switching
functions of the SPV-1 When the SP2 is powered up, an RS-232
command will also power up the SPV-1. When an input is selected
on the SP2 (manually or remotely), it sends a message to the
SPV1 to switch the corresponding inputs to the main and record
outputs simultaneously. If required you can switch the record
path independantly from the monitor.
We invite you to
experience the Bryston SST2 Series amplifiers
20 Year Warranty
-A Generation of Music
|
